To clean a stainless steel watch at home, use lukewarm water, a drop of mild dish soap, a soft toothbrush and a microfiber cloth. Before any water touches it, push the crown all the way in and make sure the watch is rated for water. Pay the most attention to the bracelet, because grime collects between the links and under the clasp.
What do you need to clean a watch?
- A small bowl of lukewarm water (not hot)
- One drop of mild, unscented dish soap
- A soft toothbrush, ideally a new one
- A microfiber cloth, the kind sold for glasses
- A toothpick or wooden cocktail stick for tight corners
That's it. You don't need special watch cleaner, and you shouldn't use anything harsher than dish soap.
How do you clean a stainless steel watch, step by step?
- Check the water rating. Look at the caseback or the product page. A watch rated 10 ATM (100m) can be rinsed and scrubbed under the tap. A watch rated 3 ATM or less, or one with a leather strap, should only be wiped with a damp cloth.
- Push the crown in. Make sure it's fully seated. Don't press any chronograph pushers while the watch is wet.
- Scrub the bracelet. Dip the toothbrush in soapy water and work along the links, the clasp and the underside, where skin and sweat build up.
- Clean the case. Gently brush around the lugs, the edges of the bezel and the caseback. Use the toothpick for the gaps where the bracelet meets the case.
- Rinse. Hold the watch under gently running lukewarm water, crystal up, until the soap is gone.
- Dry it. Pat it dry with the microfiber cloth, then let it air dry on a towel for an hour before you put it back on.
- Wipe the crystal last. A clean, dry microfiber cloth removes water spots and fingerprints.
How often should you clean a watch?
If you wear it every day, a quick scrub every few weeks keeps it looking new. Rinse it with fresh water the same day if it's been in the ocean, a pool or a very sweaty workout. Salt and chlorine left to dry can leave marks on the steel and wear on the seals over time.
What should you never do when cleaning a watch?
- No hot water, saunas or steam. Heat makes seals expand and contract. Lukewarm is enough.
- No harsh chemicals. Skip bleach, ammonia, glass cleaner and solvents. They can damage seals and finishes.
- No abrasives on brushed steel. A polishing cloth on a brushed surface leaves shiny patches that don't match the rest.
- No polish on gold-tone finishes. Metal polish or a rough cloth can wear through a gold-tone finish. Soap, water and a soft cloth only.
- No ultrasonic cleaner for the watch itself. They're fine for a bracelet removed from the case, but not for the watch head.
- No opening the caseback. Leave that to a watchmaker.
How do you clean a leather watch strap?
Keep leather dry. Wipe it with a barely damp cloth, then let it air dry away from heat or sunlight. Don't soak it, and don't wear a leather strap in the shower or pool. If you swim a lot, a steel bracelet is the better choice. I compare the two in steel bracelet or leather strap.
What if water gets inside the watch?
If you see fog or droplets under the crystal, stop wearing it and get it to a watchmaker soon. Moisture inside the case won't go away on its own and can damage the movement. For more on what the ratings actually mean, read watch water resistance explained.
How to care for a Season watch
Season No. 2 has a 316L stainless steel case and a 20x18mm 316L steel bracelet, and it's rated 10 ATM, so the full soap-and-water routine above is safe. Keep the crown in and leave the pushers alone while it's wet.
- Silver Snow and Trinity have a brushed finish. Brush along the grain and skip polishing cloths.
- Midnight Gold has a gold-tone case and bracelet. Soap, water and a soft cloth only, no polish.
- The reinforced high scratch resistant crystal glass just needs a dry microfiber wipe.
Season No. 1 is rated 5 ATM and comes on a leather strap, so wipe the case with a damp cloth and keep the strap dry. If anything looks off after cleaning, email me.
Quick answers
Can I use dish soap on my watch?
Yes. One drop of mild dish soap in lukewarm water is the safest cleaner for a steel watch and bracelet.
Can I wear my watch in the shower?
Even with a 10 ATM rating, hot water and soap aren't kind to seals over time. It's better to take it off.
Do I need to take the bracelet off to clean it?
No. A soft toothbrush reaches between the links with the bracelet still on the watch.
Have a cleaning question about your watch? Email me at journeyabouttime@gmail.com and I'll answer it myself. — Sam